Hydraulic Tyre Killer HTY001

Product Detail

Heavy Duty Hydraulic Tire Killer

 

Tire killer barricades are a simple to install highly secure vehicle control barrier, ideally suited for approach entrances to banks, military installations, airports, docks, cash collection depots, government offices etc.

 

Tire killers teeth retract below ground level when a signal is received from the push button or integrated access control unit providing safe access for authorised vehicles. When the vehicle has passed, the tire killers teeth return to the active position, ensuring total protection from unauthorised vehicle intrusion.

 

 

Tire Killer 100% Duty Cycle Tire Killer  Model: HTY001 100% duty cylce - designed for continuous and frequent use. Power is supplied from a three phase 380V power supply as standard.  GS tire killers can be interfaced to any access control systems. Traffic Light System included as optional. We recommend that tire killer barricades are used in conjunction with a drop arm gate.



Material	Galvanized sheet steel/A3 steel
Surface treatment	Paint with reflective stripe
IP	IP67
Standard color	Black and yellow
Length	2m-3m-4m-5m-6m Greater Length On Request
Distance between Blocking Spikes	200mm
Blocking Spikes Thickness	10mm
Pit Dimension Length 2m	H600*1030*2224mm
Width	580mm
Height from ground	70~110mm
Min weight capacity	40T
Blade height	150mm
Movement	Hydraulic
Working environment	-40?~+70?
Control mode	Wireless Remote
Remote Control distance	=30M
Up/Down speed	2s
Emergency Manual Lowering	Yes
Connection Line to control Unit	10m (Max Length. 30m)
Voltage	220V - 50/60Hz

Product Description

GS hydraulic tyre killers are designed especially for entrance points which have a threat of vehicle attack or for the ones that have high security requirements. If there is a threat of vehicle attack in addition to the control of vehicle access in high security applications, hydraulic tyre killer are one of the most secure systems. Even though the attack is from high tonnage vehicles with high speeds, it's not possible for the vehicle to keep on moving because of the damage given to wheels and the rim of the vehicle. Drive unit is hydraulic, but in case of power failure tyre killer can be lowered or lifted manually with the help of manual hand pump. With the help of PLC controller, raise/lower function can be achieved by every kind of card readers, biometric readers like fingerprint etc, radio control, on/off key switch etc. Besides, safety accessories like photocells, inductive loop detectors, flashing lights or red/green traffic lights can be integrated to the system very easily.

General Features
GS hydraulic tyre killers which electrohydraulically operated, is completed with hydraulic pump in outside cabinet and a control switch; GS hydraulic tyre killer is an effective way to stop even wider vehicles than cars. When closed, tyre killer is totally hidden in the street surface, so it allows the drive to all vehicles; when raised, it can stop even great trucks at a speed of 80Km/h. It is typically used for perimeter protection of military bases, embassys, government buildings, airports and some other important public service places, in car parking and a san anti-terrorist measure.

 Control Cabinet

IP65 protection is available in the cabinet 1.2 mm thick galvanized sheet metal is utilized in the body. It is painted electrostatically with RAL 7032 emboss point.



Control System
Control electronics utilized in hydraulic tyre killer is PLC controlled. Motor is driven by a contactor and protected by a thermic breaker. The low current voltage required by the system is supplied by a switch mode power supply. There is a fuse for every component in the system. All the cables running in the system are colour coded and numbered to ease tracking. There is a control keyboard in the power group as well as the desk-top one for the guard room. Time delay automatic-raising of the hydraulic tyre killer can be adjusted between any time period. Power requirement of the hydraulic tyre killer is 380 V 50~60Hz (or 220 V 50~60Hz, optional).
Construction and Drive Unit


Main mechanical elements forming the construction are heavy duty 12mm top plate and the frame consisting of 80x60x3 mm box, 100*50 mm NPU and 100 mm NPI beams. This sophisticated mechanical design enables the tyre killer to withstand 60 tons of axle loads, besides, in case of crash, linkage bars transmit the impact directly to the foundation, therefore help to protect mechanism. A cushioned cylinder powers the road blocker up as it pivots on multi-sealed bearings. All the parts are hot dip galvanized/3 layers primary coated and 3 layers painted to yellow and black, in order to prevent rusting.

Accessories (Optional)

• Flashing or red/green traffic lights

• Remote control receiver, transmitter

• Safety photocell, stand and casing

• Inductive loop detector

• Drainage pump

• Card reader system

• Hydraulic accumulator

Hydraulic Tire Killer Layout



 

How to install our hydraulic tire killer?

Why choose our hydraulic tire killer?

• PLC controlled

Control unit adopts PLC programmable controller,which can be a variety of different function models to meet the different needs of different users on function. In addition, its movement stroke is debug timing design. The user can freely adjust the height of the cover plate,effectively saving energy .

• Unique structure & design

The core part of its unique design for the hydraulic unit and mechanical power can effectively pass the mechanical energy to hydraulic drive unit,which is efficient.

• Safety & reliability

Power failure or other emergencies, you can manually descent the cover plate of the road blocker to leave a clear channel letting the vehicle access,which is stable and reliable.

• Durable & affordable

Its hydraulic transmission mode, environmental protection and energy saving,low consumption,lower failure rate,longer service life reduced the maintenance costs. In addition, the installation and maintenance is more convenient and quicker by using untraditional mechanism design.

 

 













Q : Are you manufacturer or trader?

A : We are manufacturer, we have own factory in ShenZhen, we have independent department for purchasing, producing, processing, testing, packing, storing , and transportation, believe our team is best team in china.

Q : Do you sell the accessories for Products ?

A : Yes. We have Match the parts for our testing equipment. If our machines damages by fire, water flood, earthquakes, unsteady of power and other natural disasters, we are willing supply match parts with lowest price for you.

Q : What’s your main product?

A : Our main products are security X-ray baggage scanner, walk through metal detector, Under Vehicle Scanning system, explosive trace detector, bollard, road blocker, tire killer,parking management system, parking guidance system, turnstiles, gate barrier with 28 national patents.

 Q : How about your after-sales policy?

A : Customer first is our always principle . All of our products normal warranty is 12months. We give necessary back or video guidance for daily problems. If massive products occur big quality problems. Our technical and engineer support overseas service . products have been granted by 28 national patents.

 Q : Do you accept customer Logo and customized ?

A : we accept kinds of customized and logo of all of our products for customers