Electromechanical Tyre Killers EMTK002

Product Detail

Heavy Duty Electromechanical Tyre Killer

 

Heavy Duty Electromechanical Tyre Killer

Model: ETK001

 



 

General Description

Electromechanical tyre killer is one of the highest security vehicle access control systems in which a vehicle without permission cannot enter. Tyres of the unpermitted vehicle splits open immediately, therefore the vehicle moves only a few more meters and is stopped. Jaws of the tire killer move all together. Drive unit is placed to one end of the tire killer, it stands above the ground level and is a complete assembly with the body. In this way, both smooth transmission of motion and minimum effect of external factors are achieved.

GS electromechanical tyre killers are controlled by a PLC. Open/close function can be achieved by every kind of card readers, biometric readers like fingerprint etc, radio control on/off switch or key switch etc. Besides, safety accessories like loop detectors, photocells, flashing lights or red/green light can be integrated to the control electronics very easily. Time delay arming of the tire killer can be adjusted between 0-60 seconds.

 The tyre-killer is made of A3 steel and steel blade(Shape looks like speed bump). It adopts the mechanical and electrical integration remote control device,easily operated,safe and reliable.It is advanced equipment to intercept forbidden vehicles and terrorist vehicles.

 When the interception is needed, press the Up button on the remote control,then steel blade will rise up immediately. If the vehicle force through, the tyres will be punctured and deflated.When steel blade can effectively prevent the wheel passing and forced to stop.

 When the interception task is over,press the Down button, the blade will retract back to the casing and standby.

Tire Killer 100% Duty Cycle Tire Killer Model: EMTK 100% duty cylce - designed for continuous and frequent use. Power is supplied from a three phase 380V power supply as standard. GS tire killers can be interfaced to any access control systems. Traffic Light System included as optional. We recommend that tire killer barricades are used in conjunction with a drop arm gate.



Material	Galvanized sheet steel/A3 steel
Surface treatment	Paint with reflective stripe
IP	IP67
Standard color	Black and yellow
Length	2m-3m-4m-5m-6m Greater Length On Request
Distance between Blocking Spikes	200mm
Blocking Spikes Thickness	10mm
Pit Dimension Length 2m	H600*1030*2224mm
Width	580mm
Height from ground	70~110mm
Min weight capacity	40T
Blade height	150mm
Movement	electronmechanical
Working environment	-40?~+70?
Control mode	Wireless Remote
Remote Control distance	=30M
Up/Down speed	2s
Emergency Manual Lowering	Yes
Connection Line to control Unit	10m (Max Length. 30m)
Voltage	220V - 50/60Hz

Product Description

 Control Cabinet

IP65 protection is available in the cabinet 1.2 mm thick galvanized sheet metal is utilized in the body. It is painted electrostatically with RAL 7032 emboss point.



Accessories (Optional)

• Flashing or red/green traffic lights

• Remote control receiver, transmitter

• Safety photocell, stand and casing

• Inductive loop detector

• Drainage pump

• Card reader system

• electronmechanical accumulator

Electromechanical Tyre Killer Layout



Why choose our electronmechanical tire killer?

• Unique structure & design

The core part of its unique design for the electronmechanical unit and mechanical power can effectively pass the mechanical energy to electronmechanical drive unit,which is efficient.

• Safety & reliability

Power failure or other emergencies, you can manually descent the cover plate of the road blocker to leave a clear channel letting the vehicle access,which is stable and reliable.

• Durable & affordable

Its electronmechanical transmission mode, environmental protection and energy saving,low consumption,lower failure rate,longer service life reduced the maintenance costs. In addition, the installation and maintenance is more convenient and quicker by using untraditional mechanism design.

 

 







Q : Are you manufacturer or trader?

A : We are manufacturer, we have own factory in ShenZhen, we have independent department for purchasing, producing, processing, testing, packing, storing , and transportation, believe our team is best team in china.

 Q : Do you sell the accessories for Products ?

A : Yes. We have Match the parts for our testing equipment. If our machines damages by fire, water flood, earthquakes, unsteady of power and other natural disasters, we are willing supply match parts with lowest price for you.

 Q : What’s your main product?

A : Our main products are security X-ray baggage scanner, walk through metal detector, Under Vehicle Scanning system, explosive trace detector, bollard, road blocker, tire killer,parking management system, parking guidance system, turnstiles, gate barrier with 28 national patents.

 Q : How about your after-sales policy?

A : Customer first is our always principle . All of our products normal warranty is 12months. We give necessary back or video guidance for daily problems. If massive products occur big quality problems. Our technical and engineer support overseas service . products have been granted by 28 national patents.

 Q : Do you accept customer Logo and customized ?

A : we accept kinds of customized and logo of all of our products for customers